产品 产品信息
09 09 2021

品牌源喜 两路视频切换控制器 车载前后视 倒车带按键  两路控制器  视频切换器

当前位置: 首页> 汽摩及配件、用品、维修> 汽车影音> 车载CD
来源:[广州喜合源电子]
联系人:任先生
手机:18926185824
电话:020-29036269
传真:020-29036269
QQ:654383989
Email:654383989@qq.com
地址:广东省广州市广州市永福路盛大国际
品牌:源喜
价格:面议 元/
供应地:广东省广州市
产品型号:XY-3027

公司品牌:源喜,Saferdriving

 

公司网址:http://www.saferdriving.cn    更多热销款式请查看公司网址!

欢迎批发!

 

联系电话:18922768785

 

产品特点:

☆   前后视频智能切换

☆   高速高性能微电脑处理器

☆   安装方便,接线简单

电气特性:

☆   电压:9-16V

☆   静态电源:<10mA

☆   环境温度:-10℃—70℃

☆   相对湿度:≤95﹪

工作模式:

一.     启动ACC,自动延时显示前视8秒。

二.     挂倒档时,自动显示后视。退出倒档后,自动切换到前视并延时15秒。

三.     在待机状态下,按下按键,前视长开,直到下一次按下按键关闭前视。

四.     在前视常开状态下,倒档可暂时中断前视,且自动切换到后视。

 

接线说明:

☆   红线:ACC电源正极。

☆   黑线:ACC电源负极,搭铁。

☆   蓝线:倒车灯。

注意:

一.     摄像头视频输入端口傍边的小红线分别接前后视摄像头的电源供电正极。

二.     输出端口的小红线接显示屏触发线,如果原来显示屏触发线接倒车灯的,先和倒车灯断开,再接上这条小红线。

 Car Front And Rear View CameraControl Box System XY-3026

Thanks for purchasingour production. Correct installation and operation can make your driving safelyand conveniently. Welcome to purchase our Front View Camera, and Rear ViewCamera for this system.

 

1. Parameters:                                                          

Working Power:Max: 50MA, 12V DC

Systemsignal: PAL/NTSC   Video output:1.0VPP/75Ω

Workingtemperature: -20℃-80℃

 

2. DeSCRJPTion:

Front viewcamera power: supplied by control box system.

Rear viewcamera power: supplied by control box system, or could be supplied by reverselamp power.

 

Functions:

1.Automatical front view whenstarting: 

When car engine starts, the systemwill activate the car monitor and front camera to check the front view for 8seconds, then turn off.

2. Automatically rear view:

When you pull the reverse gear , thesystem will activate the monitor and rear view camera till the reverse gearback, then switches to front view camera video for 15 seconds then shutoff.  

3. Front view always activate mode:

Press the control switch to enterFront view always activate mode.

In this mode, the system willactivate monitor and the front view camera always.

To quit the mode, press the controlswitch again.

 

Working priority: Back View>FrontView




电话咨询获取底价